|
Craig, My Myth box has a dual capture card (Hauppage PVR-500), and a firewire card for HD stuff. But if I wanted to, I could have as many capture cards as could fit in the backend. Unfortunately, I run Knoppmyth so I can't help with the hardware identification issue. Hope this helps a bit. v/r Al Lopez Craig E Ziegel wrote: 20100316130631.0ac06018@craigoffice.local" type="cite">Steve, you had to expect this. I have a hit a couple speed bumps and hoping someone can answer a few questions I have. It is F 12 with Myth TV I have 2 capture cards an ATI HDTV Wonder coming up in the gui using cx88 driver and firmware. I also have a Hauppage 1600 with encoder gui says cx18 driver and firmware. If I take the ATI card out of the box hauppage card shows up in the gui but when the ATI card is in the box all the hauppage info goes away. only the ATI card info. is there. Can I have more than one capture card on the backend or do I need to have a backend for each capture card? Yes Steve I know (Gui) I am also attaching 2 errors I am getting trying to populate the backend. Please shine some light on this for me. Thank you |