[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Installing on Proliant



Where would I find/get a "block devices disk?"

Thanks again,
Chas

-----Original Message-----
From: Erich Schroeder [mailto:erich@museum.state.il.us]
Sent: Thursday, August 22, 2002 2:07 PM
To: 'silug-discuss@silug.org'
Subject: Re: Installing on Proliant


How old is the proliant? Is the RH 7.3 self-burned? I have had some
problems with older Compaq "professional workstations" with scsi cdroms
using self-burned disks (a cd-r problem). Also, when I used the "skipjack"  
beta version for 7.3 I needed to boot from floppy and have the block
devices disk available to get the driver for the scsi controller.

On one of the machines I finally had to temporarily install an IDE cd for 
the installation, and then do the rest of the updating with apt.

eks

On Thu, 22 Aug 2002, Brune, Charlie wrote:

> I'm unable to install RH 7.3 on a Compaq Proliant server.  I think the problem
> is that the CD-ROM drive is a SCSI drive and RH isn't finding it (I suppose it
> prefers IDE CD-ROM drives).
> 
> Any thoughts?  Is there some magic option I need to type during the boot (I
had
> to boot from a floppy made from "boot.img").
> 
> The symptom is that the stuff ("vmlinux", etc.) appears to load okay from the
> floppy, but then it barfs rather quickly at the point where I think it should
> finally be reading from the CD-ROM.
> 
> Thanks,
> Charlie
> 
> -
> To unsubscribe, send email to majordomo@silug.org with
> "unsubscribe silug-discuss" in the body.
> 

-- 
---------------------------------------------------------------------
Erich Schroeder                    Phone: (217)785-0033
Curator, Information Technologies  FAX:   (217)785-2857
Illinois State Museum GIS Lab      email:erich(at)illinois.state.museum
                 http://illinois.state.museum/
---------------------------------------------------------------------


-
To unsubscribe, send email to majordomo@silug.org with
"unsubscribe silug-discuss" in the body.

-
To unsubscribe, send email to majordomo@silug.org with
"unsubscribe silug-discuss" in the body.