Re: OT: cisco question

["Bob T. Kat" <bobkat79@charter.net>]

Have I mentioned how much help this list is, I forgot about the base lvl
hardware config program, I've used it to change the login password
before, woot I found an unopened smartnet maint for a 1700, got the new
ios and I'm rdy to roll, thanks again for the help

Bob T. Kat


-----Original Message-----
From: silug-discuss-owner@silug.org
[mailto:silug-discuss-owner@silug.org] On Behalf Of fiaid@quasi-sane.com
Sent: Thursday, December 12, 2002 1:13 PM
To: silug-discuss@silug.org
Subject: Re: OT: cisco question

ctrl-break. :)

> i deleted ios from a router one day by accident
> 
> when you first boot it up you can have it go into some type of
> debug/configuration mode that will let you tftp a new firmware to it,
prior
> to ios even loading
> 
> the exact method for doing so i cannot remember (i had a guy helping
me over
> the phone)
> 
> Casey
> 
> ----- Original Message -----
> From: "Bob T. Kat" <bobkat79@charter.net>
> To: <silug-discuss@silug.org>
> Sent: Friday, December 13, 2002 2:10 AM
> Subject: Re: OT: cisco question
> 
> 
> > i would also like to mention that you shouldn't do anything with new
cisco
> > equipment when you only have 19 days (11 working days) left till
your no
> > longer at that job, tends to put things in a bit of a rush and you
tend to
> > not take notice how bad the salebloke screwed up your order (um
wrong
> > feature pack, and no smart net maint agreement, even though they
were both
> > quoted correctly on the final quote), if anyone needs me i'll be
behind
> the
> > lan station counting the number of pins on all the connectors on all
the
> > equipment, with my eyes closed
> >
> > Bob T. Kat
> >
> > ----- Original Message -----
> > From: <fiaid@quasi-sane.com>
> > To: <silug-discuss@silug.org>
> > Sent: Thursday, December 12, 2002 12:08 PM
> > Subject: Re: OT: cisco question
> >
> >
> > > > Ok first I can get an enable prompt, the config is fine it's the
ios
> > > > (12.1.5) itself that doesn't support the hardware, and yes I
have the
> > > > config backed up (although it really doesn't matter as it would
only
> > > > take about two minutes to reconfigure this thing), and now after
> looking
> > > > into the root of the problem it turns out the ios feature pack I
was
> > > > loading was the one sold to me for this router (I was thinking I
could
> > > > have made a mistake and put the wrong disk in my cd case), I
guess
> it's
> > > > still my fault for not reading through all the docs that came
with the
> > > > router and the ios feature pack (that's what I get for
assuming),
> unless
> > > > the "flash card" is built in the encasement (not ejectable) then
no it
> > > > doesn't have one (although I'll now be digging through the
hardware
> > > > guide to see if it does have a flash card), thanks for the idea
on the
> > > > flash card tighe
> > >
> > > i would like to mention that you REALLY shouldn't so anything with
> crisco
> > > equip unless you got a flash card.  mostly because you can boot
off of
> it
> > > incase you screw something up.  :)
> > >
> > > tighe
> > >
> > > --
> > > Tighe Schlottog         workape         fiaid
> > > "Nothing is too cruel if it is funny enough."
> > >
> > >
> > > -
> > > To unsubscribe, send email to majordomo@silug.org with
> > > "unsubscribe silug-discuss" in the body.
> >
> >
> > -
> > To unsubscribe, send email to majordomo@silug.org with
> > "unsubscribe silug-discuss" in the body.
> >
> 
> -
> To unsubscribe, send email to majordomo@silug.org with
> "unsubscribe silug-discuss" in the body.
> 

-- 
Tighe Schlottog         workape         fiaid
"Nothing is too cruel if it is funny enough."


-
To unsubscribe, send email to majordomo@silug.org with
"unsubscribe silug-discuss" in the body.


-
To unsubscribe, send email to majordomo@silug.org with
"unsubscribe silug-discuss" in the body.